THIS IS A PRE-ORDER KIT. Pre-orders ship out by August 15th. 

Pre-order now to reserve your color! Available in green, pink, and white.

🡺 Build it in 30 minutes. Fight it the same day. Upgrade it for years! 🡸

This kit version does NOT include a controller, and is intended for builders or operators that already have a controller that can bind to this receiver. This kit has a Malenki Nano as a receiver, which utilizes the AFHDS2A (Flysky FS2A) protocol. Base CC2500 or ELRS controllers (such as the RM Pocket) are not capable of communicating with this protocol.

If you are looking to get EVERYTHING you need in one kit with the easiest setup, check out the all-inclusive kit version!

ZipZop is a simple and effective 150g flipper combat robot kit, intentionally designed to be the easiest way to get started in robot combat. 

• No soldering: ZipZop's wiring harness comes pre-made, with wires cut to exact lengths so every component naturally lands in the right place.
• No confusion: Only two types of screws and one screwdriver for the entire build, a clear step-by-step instruction booklet, and full video walkthrough.

Once you put ZipZop together, it's ready to beat the competition! 

• Competition-legal in the 150g fairyweight class per the SPARC ruleset. Just go to robotcombatevents.com and register for an event near you!
• The chassis, front forks, and flipper are made of PEBA, a tough, bouncy material that flexes instead of shattering. It's super resilient against impacts and spinning weapons!
• The 240mm (9.5in) width of ZipZop gives you a distinct advantage over smaller opponents!
• Placed top 20 in the nation for 2025!

But ZipZop isn't JUST a great, competitive starter kit. It's built to grow with you!

• Unlimited upgradability: ZipZop's front forks and wheel guards use "dovetail" slots to make them easy to replace OR upgrade with new forks that you design and print yourself! Base CAD files are included with your purchase.
• Room to Experiment: Without wheels, front forks, top plate, or flipper arm, ZipZop weighs about ~90g, leaving you ~60g of headroom to design and experiment with swapping in new parts! The possibilities are endless!

Included in your ZipZop Kit:

ZIPZOP:

• ZipZop Wiring Harness (Includes two N-20 carbon brush high-power drive motors, a Feetech FT2304M Servo, a Malenki Nano receiver and speed controller, a two-position power switch, and a SYP Red female 2-pin battery connector)
  
• 2S (7.4V) 260mAh Lithium Polymer (LiPo) battery
• USB 2S Battery Balance Charger
• PEBA Chassis
• PLA+ Top Plate
• One Pair of PEBA Front Forks & Wheel Guards 
• Four Lego Tires (two spares)
  
• Four 3D Printed Nylon Tire Hubs (two spares)
  
• PLA+ Battery Charging zzBlock
• PLA+ Power Switch zzBlock

TOOLS & ACCESSORIES:

• Torx T6 Screwdriver
• Twenty Steel M2 Self-Threading Screws (Torx drive) (nine spares)
• Two Black-painted Steel M2 Machine Screws for Servo (Torx drive) (one spare)
• Two M2 Washers x2 (one spare)
• Two Servo Horns (one spare)
• Step-by-Step Build Guide
• Long-term ZipZop Care Guide
• Assorted 1.5" Bot Bumper Stickers
  
• Assorted Googly Eyes
• RoboDome Stickers
• RoboDome Mini Traffic Cones (to practice your driving skills!)
• Foam Fried Egg (to practice your flipping skills!)
• CAD files for each 3D printed part of ZipZop (STEP, 3MF, STL)

Available in green, pink, and white. Pre-order now to reserve your color. Ships by August 15th.

ZipZop is intended for hobby use only, and is not a toy. Recommended ages 14+. Adult supervision required for ages 13 and under.

For bulk orders, educational or demo purposes, or general questions, please reach out below!